User's Manual

29
4.4. H/W Revision
4.5. Serial Number
4.6. Part Number
4.7. Scanner Type
4.8. Scanner S/N
4.9. Scanner F/W
4.10. BT MAC Addr.
4.11. BT F/W Ver.
4.12. NFC F/W Ver.
13. Functions of the Keys
On Idle Screen
On Menu Screen
SCAN Key
 Scans
 Starts/Stops Auto Scan
 Selects Menus
 Selects settings
UP Key
 Turns off when pressing for 5
seconds
 Turns on when pressing for 1
second on power OFF
 Display enters to the menu
screen when pressing with
DOWN key at the same time
 Moves up to the menu above
 Keeps it moving up when
pressing for 3 seconds
DOWN Key
 Disconnects BT when pressing
for 3 seconds if BT is
connected
 Tries to reconnect when
pressing for 1 second if
disconnected on BT HID mode
 Display enters to the menu
screen when pressing with UP
Key at the same time
 Moves down to the menu
below
 Keeps it moving up when
pressing for 3 seconds
14. Initializing the Memory
To delete the data saved in storage:
1. Select “Reset Memory” in the main menu
2. Check the message of “Erase All Data?” and select “Yes”
3. Wait until deleting is completed
15. Using the USB Memory in Connection with PC
When connecting with PC, you can select the serial type and disk type. Basic setting is serial
type.
To use your device with disk type, set as follows
1. Admin Menu-> Configuration -> USB Settings -> USB Mode -> USB Disk
2. Check “Flash Erase And Reset” message and select “Yes”