User's Manual

28
3.1.3 Display Format
- Setting the display format of the scan result and information
3.2. USB Settings
3.2.1 USB Mode
- You can select the USB connection method. See “3.10. Using the USB memory in
connection with PC
3.3. GPS Settings
3.3.1 GPS Power
- Setting the GPS Power on/off
3.3.2 Power Mode
- Setting the power save mode
3.3.3 Bypass Data
- Setting the bypass of NMEA data
- When setting to Enabled, operated by BT GPS Receiver and not transmits barcode
data
3.3.4 Reset GPS
- GPS Reset Setting
3.4. NFC Settings
3.4.1 NFC Power
- NFC power on/off Setting
3.4.2 Support Type
- Select the supporting tag type
3.4.3 Auto Detect
- Auto Detect Setting
3.4.4 F/W Update
- NFC Firmware Updating
3.5. System Settings
3.5.1 Auto Erase
- When the storage is full, data is automatically deleted if you set it to “Auto Erase”
- When the device is Enable, all data is deleted if the storage is full
- “Buffer full” is displayed when the device is Disable
3.5.2 Sleep Timeout
- Sleep timeout setting
3.5.2 Date/Time
- Date/Time Setting
3.5.4 Button Lock
- Button lock Setting
3.5.5 Power Save
- Power save mode setting
3.5.6 Factory Reset
- Factory reset Setting
3.5.7 F/W Update
- Updating is available when you enter the password (ask for the password to the
administrator)
4. Device Info
4.1. F/W Version
4.2. Memory Info
4.3. Battery Info