User's Manual

27
1.4.12 Redundancy (SE4710)
- Setting the Scan level to prevent from misreading
1.4.13 Inverse 1D (SE4710, SE655)
- Setting the scanner whether the color-reversed 1D barcode should be read or not
1.4.14 Prefix / Suffix
- Deleting Prefix, Suffix
1.5. Duplicate
- Setting to check if data is duplicated when scanning
- Duplicated data is not saved when the device is set to Enabled
2. Bluetooth
2.1. Power
- Setting On/Off power of the device
2.2. Wakeup Nulls
- You may transmit, or not transmit the Null data to wake up the module when the
Bluetooth module of the Host is on Sleep
2.3. Connect Alert
- Setting the alert if the Bluetooth is disconnected while transmitting the barcode
2.4. Data Format
- Setting the format of the Barcode transmission data
- Barcode Only : Transmitting the barcode data only
- Packet Data : Transmitting the packet data of the barcode
2.5. Handshake
- You may check if the packet data transmission was “Success” or “Fail” by setting the
handshake function
2.6. HID Settings
2.6.1 HID Reconnect
- Setting the function of reconnection on HID transmission mode
- If there is HID connection record, and it is currently disconnected, you can set it to
Reconnection by using DOWN key
2.6.2 HID Keyboard
- Setting the Keyboard input method of the connected device
2.6.3 HID Delay
- Setting the time of HID text transmission to get help with stable transmission
2.6.4 HID Control Char
- You can transmit the values of ASCII (0x01 ~ 0x1F) which is not expressed by the
keyboard
2.6.5 HID Sync
- Setting the synchronization on the HID transmission mode
3. Configuration
3.1. UI Settings
3.1.1 Language
- Language (English, Korean)
3.1.2 Auto Exit Time
- Setting the operation time of auto exit from the menu