User's Manual

26
12. PM3 Administrator Menu and Functions
To use the administrator menu, select “Admin Menu” in the main menu.
General uses may not change the settings of the admin menu. Ask for help to an
administrator when changes are required.
1. Barcode/Scan
1.1. View Data
- Searching or deleting the saved barcode data
1.2. Symbologies
- You can select use or disuse of barcode type. It is toggled when pressing the key
- When “*” is shown at the left corner of the display, it means the barcode type is being
used
1.3. Code Options
- Setting the detail options for each of the scanner type
1.4. Scan Options
1.4.1 Scanner Lock
- Scanner Lock Setting
1.4.2 LED On Scan
- LED alert setting when scanning is “success” and “Fail”
1.4.3 Trigger Release
- Operation mode setting for scan trigger
- When enabling, scan button should be pressed in order to apply the trigger time.
Scanner Trigger becomes “off” when the button is not pressed
- Trigger Time is continued if the button is not pressed when the device is disabled
1.4.4 Trigger Timeout
- Setting the Scan Trigger Time Out
1.4.5 Power save mode
- Setting the Power save mode
1.4.6 Terminator
- Setting the terminator text when transmitting the barcode
1.4.7 Transmit Barcode ID
- Setting the Barcode ID Transmission
1.4.8 Security Level
- Setting the Security Level
1.4.9 Scan Angle (SE965HP)
- Setting the angle of the Scanner Beam
1.4.10 Adaptive Scan (SE965HP)
- Setting the focus of the Scanner Beam to Automatic change
1.4.11 Picklist Mode (SE4710)
- Setting the scanner to scan the barcode only indicated by the aimer