User's Manual

25
3. Select a device from the list and connect.
10. Reconnecting HID
When HID is disconnected while using PM3 device, reconnection is available by following the
options below.
1. Admin Menu -> Bluetooth -> HID Settings -> HID Reconnect -> Enabled
2. Press DOWN key for 1 second to reconnect
3. “Bluetooth Connected” is shown on the display when successfully reconnected
11. PM3 User Menu and Functions
To use the User Menu, Select “User Settings” in the main menu
1. Auto Scan
- You can select Auto Scan and the scanning time on a 0.25 second cycle
2. Beeper Volume
- Beeper Volume can be adjusted
- Volume size is available among “None”, “Low”, “Middle”, “High”
3. Vibrator
- You can select the vibrator working when scanning is “Success” and “Fail”
- Vibration time can be selected among “Short”, “Middle”, “Long”
4. Connect Mode
- Bluetooth transfer mode can be selected. Basic setting is “SPP 2.0”