User's Manual

To Decode a Bar Code

1. Position the Bluetooth scanner over one of the Sample Bar Codes on paragraph 6.9.

A range of 4–10 inches (10–25 cm) from the bar code is recommended.

2. Project the aiming brackets by pressing and holding the Scan key. The Scan LED lights red.

3. Center the aimer crosshair over the bar code. The aiming beam should be oriented in line with

the bar code to achieve optimal decoding; Omni-Directional Scanning Positions on paragraph

6.10.

4. When the bar code is successfully decoded, the decode LED lights blue and the terminal beeps.

Sample Bar Codes

You can use the following bar codes to verify decoding:

Code 39 PDF 417

7. Using the Laser/CCD Engine

Overview

The BLUETOOTH SCANNER (N4313/SE965HP laser version, SE655 CCD version) contains a laser

diode that emits a beam toward an oscillating mirror that scans through the code and the reflected

light is bounced off of two mirrors back to the collector. The laser version reads all popular 1D bar

codes. See Overview on paragraph 6.1 also.

☞NOTE: Performance may be impacted by bar code quality and environmental conditions.

Available Laser Engines

The BLUETOOTH SCANNER can be equipped with an N4313, SE965HP or SE655 laser/CCD engine

(depending on the configuration purchased).