User's Manual

11
During the charging process, the LED positioned at the upper-left side of the display is red
constant. Once the charging process has been completed this LED is green constant.
3.3. Turn Your Device On
Press the UP key for 1 second.
3.4. Turn Your Device Off
Press the UP key for 5 seconds.
4. Get to Know Your Device
Feature of Your Device
The following list outlines a few of the feature included in your device.
PM3 Bluetooth scanner
 Micro Processor: 32-bit ARM® Cortex® -M4 RISC processor 120Mhz
 RAM Memory: 128KB
 FLASH Memory: 1MB, 4MB Storage
 0.96” OLED Display: 128x64 Dot Passive Matrix/Monochrome(Blue)
 Keyboards: 3 Keys(1 Scan key, 2 Menu keys)
 Power Supply : AC power adaptor
 HandyLink connector: USB 2.0 Full speed Client,
 Scan Engine:
• 1D engine: SE965HP
• 1D engine: N4313
• 1D CCD engine : SE655
• 2D engine : SE4710
 Battery: Lithium Polymer battery, Standard 3.7V/900mAh
 IP54(IEC 60529)
 Audio: Built-in speaker
 BT: Bluetooth Radio 2.1+EDR with Internal Antenna
 Notification LEDs
1) Power indications, 2) Scan reading indications 3)BT pairing indication
 Notification Vibration Motor
 NFC : 13.56MHz HF, ISO14443A, ISO14443B & ISO15693 are supportive, Mifare
 GPS: Stand-alone GPS