User's Manual

User manual PM250
© All rights reserved.
Pointmobile 41
5.14.3 Wireless power tab
Turn on or off and set detailed configuration of the
wireless devices.
1. Open
Start > Settings > Control Panel >
Wireless power
2. Enable Max Power. Wireless device will work
with maximum power. This option shortens
battery life.
3. Automatically Connect – after wake up
device will automatically reconnect to available
preferred wireless network.
4. Tap on Wireless power button to turn on
wireless.
5. Tap on BlueTooth Power button to turn on
Bluetooth wireless device.
6. To exit, press OK from the command bar, or press
the < ENT > key on the keypad.
5.14.4 Factory Mode tab
If devices performance becomes unstable or settings
have been changed to state when it is not possible to
undo them then it is recommended to perform reset to
factory mode.
5. Select
Control Panel -> Power -> Factory
mode tab
6. Tap on Factory mode
7. Confirm by taping on Yes
8. After restart you will need to align screen
All data and custom settings will be lost if Factory
mode is performed. It is recommended to backup all
your data to removable storage or to other computer
before performing a Factory mode.