Operation Manual

English Point of View SmartTV HDMI 210 dongle - Android 4.2

1.2 Connections

Notes:

- The HDMI port does NOT supply power to the device. You MUST use the DC power

adapter to power the device.

- Only the Micro-USB connection on the back of the device can be used for powering.

- The microSD card can only be inserted in one orientation. Inserting a microSD card

into the slot requires very little force. If the memory card is blocked, please stop,

review and change the orientation of the card.

1.3 Using the remote control for operation

Please refer to the following schematic for the function of that specific button.

To active the remote control on the Smart TV 210 dongle, please insert the

Micro RF receiver into the big USB port of the Smart TV 210 dongle.

1. Power on / off

2. Mute audio

3. Arrow up / down / left / right

4. OK / Confirm

5. Return

6. Mouse mode on / off (use arrows to navigate)

7. Home

8. Volume up

9. Volume down

You can navigate through android by using the

arrow buttons. If you press the mouse mode

button (6) the arrow keys are used to navigate a

mouse cursor over the screen.

This remote control uses a CR2032 button cell

battery. This can be accessed through the latch

on the back side of the remote control. You can

open this latch by using a coin to turn it

counterclockwise.

Micro RF receiver

Remote control