Operating Guide

Point of View ONYX 507- Android 4.0 Tablet PC English
11
4.4 Inserting SIM 1 and SIM 2
Turn off your device before inserting the SIM cards in your tablet. Please look at the SIM
symbols on the back of the tablet and insert the SIM cards accordingly. SIM 1 is used for a
‘calling’ SIM card and SIM 2 accepts ‘calling + data’ SIM card.
Now turn on your tablet and wait until Android has fully started. If a PIN code has been
enabled on the SIM card(s) the device will ask to enter the PIN code.
The system will also ask which SIM card to use for either voice or data. Please make sure
you select the correct SIM card for each function to avoid extra charges by your network
provider. This SIM setting and others settings can be found and changed afterwards in
“Settings / Wireless & networks / SIM Management”. Also in this screen, make sure that
“Data enabled” is checked to allow internet over 3G. Also when you are on a roaming
network (contact your mobile provider for information), check “Data roaming” as well.
Settings regarding the network provider are located in:
“Settings / Wireless & networks / More … / Mobile networks”.
Once you are connected you should see a ‘mobile network icon’ in the bottom right corner.
Depending on your type of connection, this icon may display an H (HSDPA), G (GPRS), E
(Edge) or simply R (roaming) or 3G. Note that 3G communication will automatically be
disabled when a Wi-Fi network is connected. If you want to use 3G network, please turn off
the Wi-Fi network first