User Manual

Updated November 12, 2021
Activating POGS Bluetooth
TM
Slide the on/off button to activate or deactivate the Bluetooth
TM
functions of your POGS.
When activating, the LED light next to the on/off
button as well as under the logo on the side of the
earcans will turn on. If you are wearing the headphones,
you will hear an ascending tone.
When deactivating Bluetooth
TM
, you will hear a
descending tone, and the LED lights will turn off.
Tip: You should always deactivate Bluetooth
TM
on your
POGS when not in use to save battery power.
Bluetooth
TM
pairing
You can link (pair) compatible devices, e.g. most smartphones, with your POGS Bluetooth
TM
headphones via Bluetooth
TM
. The audio output of your smartphone can then be heard with the
POGS Bluetooth
TM
.
To pair your POGS wireless headphones press the Bluetooth
TM
pairing button (#4) for
approximately 5-7 seconds. The LED light will start flashing a blue (1 sec) and a white light
(1sec). This means that your POGS headphones are ready to be paired to a device.
Activate the Bluetooth
TM
function on your external device (e.g. smartphone is used below as
example).
• Let your smartphone search for Bluetooth
TM
devices (you can find more information
in the instruction manual of your smartphone).
• “My POGS Wireless Headphones” or “POGS Gecko” should appear in the list of
detected devices after the search run.
• Select “My POGS Wireless Headphones” or “POGS Gecko” from the list of detected
devices.
• Pairing is now complete and your POGS Bluetooth
TM
are linked to your smartphone.
The LED will illuminate in blue once every 7 seconds for 1 second which means your
POGS are connected.