Quick start Guide-PLUS III

Remote Camera Triggering

Triggering a Remote Camera with your Plus

III Transceiver

1. Connect a Plus III to your remote camera via the appropriate remote

camera cable.

2. Select a Channel and Zone A, B, C, or D via the Channel Up/Down

Buttons

and Zone Toggle Buttons.

3. Press the TEST button on the transmitting PocketWizard radio or re the

camera in your hands. The remote camera will trigger.

If the transmitting PocketWizard radio in your hands is a Plus III and

you are using the correct ACC cable, you can pre-release the remote

camera by pressing the TEST button half way

. This wakes up the

remote camera so it can respond more quickly and consistently. It can

also engage autofocus.

Plus

III on camera OR in hand

(Transmitting)

Plus III connected to Remote Camera

(Receiving)

NOTE: The transmitting PocketWizard

radio triggers the receiving PocketWizard radio,

which res the remote camera via a remote camera cable.

English