Quick start Guide-PLUS III
Specications
Technical Information
Frequency: Plus
®
III FCC/IC: 340.00 – 354.00 MHz
Plus
®
III CE: 433.42 – 434.42 MHz
Transmit Output Power: Less than 1 milliwatt (1/1000 of a watt)
Batteries: 2 x AA (IEC:LR6)
External USB Power at ~5 volts and < 100mA
Triggering Delay: 1/1200 of a second
Operating Temperature: Above -15° C (5° F) and below 50° C (120° F)
Always use
fresh batteries in cold temperatures.
Storage Temperature
(without battery): Above -30° C (-22° F) and below 85° C (185° F)
without batteries.
Flash/Camera Port Sync Voltage Tolerance: 300 Volts
Backlit LCD: The Plus III’s backlit LCD activates automatically when any
button other than TEST is pressed. It turns off after 5 seconds.
LEDs: Red LEDs are used for dim light application and do not indicate
a hazardous status.