Quick start Guide

To change the values used for the center point, turn off your transmitter then turn it back on and follow these steps
again. See the PowerTracking Tab in the PocketWizard Utility section below for more information.
IMPORTANT NOTE: Shooting in Shutter Priority/Tv, Program, Full Auto, or shooting quickly or making rapid exposure
changesisnotrecommended.Theashvaluesmaychangerapidlyandyourremoteashmaynotbeabletokeepup.
Honoryourash’sreadywaittimeor“dump”asnecessary.
FEC NOTE: Flash Exposure Compensation (FEC) can be set in many places and all values are added together.
FECcanbeset:
• OnthePowerDialsoftheAC3ZoneController
• OnthecameraforallzonesexceptAC3Manualzones
• Fortransmittingradios,thePocketWizardUtilitycanadjustthePowerTrackingcenterpointforISOandaperture
which affects all zones
• ForaPowerMC2,thePocketWizardUtilitycanadjustFECforthedirectlyconnectedashonthePowerTrackingtab
IfthecombinedFECsettingsaremoreorlessthanyourash’scapabilities,thentheashwilloperateatmaximumor
minimum output accordingly.