Quick start Guide

Status LED / TEST Button
All equipment should be turned OFF when making connections or unwanted triggering or other erratic
behavior may occur.
WARNING: To avoid electrical damage, never connect the PowerMC2 to a USB while it is installed in the
Einstein
™
E640 Flash. Always remove the radio module from the ash pack before connecting it to the USB.
The rst exposure after making initial connections or powering on may not be properly exposed and ash
power levels may not be set as expected. Always test at least twice.
All information in this Quick Guide is subject to change. Visit www.PocketWizard.com/support to nd the
latest ash and features compatibility, Quick Guides, and Owner’s Manuals or visit wiki.pocketwizard.com.
READ ME FIRST:
USB Port
Connector Pins