Quick start Guide

Center on Aperture Only: PowerTracking will only work with aperture changes. Set the desired aperture using

the Aperture Center-On control. ISO changes will be ignored for PowerTracking for Nikon cameras, and FEC/ISO

changes for Canon cameras.

Center on ISO Only: PowerTracking will only work with ISO changes for Nikon cameras and FEC/ISO changes for

Canon cameras. Set the desired ISO using the ISO Center-On control. Aperture changes will be ignored

for PowerTracking.

No Change (trigger only): Turns off PowerTracking and the Power Dials on the AC3 ZoneController will not

 adjustthepoweroutputofyourremoteash.Usethissettingifanotherphotographeriscontrollingtheash’s 

 manualpoweroutput,likewhensharingasheswithanotherphotographerandyouwanttousetheexactsame 

 manualashoutputpower.

For other PocketWizard Utility settings, refer to the documentation for the MiniTT1, FlexTT5, AC3 ZoneController,

PowerST4 for Elinchrom, or other ControlTL radios or accessories.

owerMC2 radio information (RECEIVE ONLY):

340.00 – 354.00 MHz, US FCC/IC

433.42 – 434.42 MHz, CE

IMPORTANT: US FCC / Canada frequency radios are NOT compatible with CE frequency radios or Japan frequency

radiosandviceversa.Formoreinformationonfrequency,pleasegoto:

www.PocketWizard.com/wheretobuy/frequency

Temperature

OperatingTemperature:Above-15°C(5°F)andbelow50°C(120°F)

StorageTemperature:Above-30°C(-22°F)andbelow85°C(185°F)