Quick start Guide

Basic Wireless CLS / i-TTL

No ash on camera

1. Slide MiniTT1

Transmitter or FlexTT5

Transceiver onto camera.

2. Slide Speedlight onto remote FlexTT5 Transceiver. Set the Speedlight for standard i-TTL

mode (not REMOTE or MASTER). Repeat for each remote Speedlight. All remote i-TTL

Speedlights will be treated as one zone of light.

Note: You need a receiving FlexTT5 for each remote Speedlight.

3. Make sure all your PocketWizard

radios are on the same channel and take pictures

normally.

This mode is like using Nikon’s Commander Mode/Function with the following settings:

• Remote Groups A, B, and C set to TTL

• Flash Output Level Compensation for all groups set to 0.0 Ev

• MASTER or built-in ash set to - - (ash cancelled)

CLS / i-TTL

English