Quick start Guide

a
Specications
Specications
Trigger Delay: 0 seconds – “faster than a wire” when using compatible Nikon cameras.
Note: Approximately 900 microseconds delay if using Basic Trigger Mode.
Batteries:
FlexTT5
®
- 2 x AA (IEC:LR6) (60 hours)
MiniTT1
®
- CR2450 or CR2354:
• Approximately 30 hours of camera awake time, varies with camera and
Speedlight models.
• Low temperature operation and used batteries will have reduced battery life.
Always use fresh batteries when working in the cold.
• Basic Trigger Mode consumes the battery more quickly and is not
recommended when using the MiniTT1 on a Nikon camera.
Maximum FPS: Up to 12 (varies with camera; i-TTL usage reduces FPS)
Operating Temperature: Above -15º C (5º F) and below 50º C (120º F) for FlexTT5
Above -12º C (10º F) and below 50º C (120º F) for MiniTT1
• Low temperature affects coin cell performance. Always use
fresh batteries in cold temperatures.
Storage Temperature (without battery): Above -30º C (-22º F) and below 85º C (185º F)
English
11