Owner`s manual

Mounting

suggestion.

Mount the remote PocketWizard so that the antenna is

completely above the top edge of the flash pack and away

from any metal (light modifiers, stands, etc.).

mounTing

Mount a remote Plus II Transceiver using any of the included methods.

See “Sustaining High Performance” for more mounting information.

For attaching to

flashes, brackets,

cameras, etc.

See NOTE 2.

VELCRO

For tripods,

mounting arms,

isolation bars,

brackets, etc.

1/4-20 Mount

For mounting on

a bracket shoe, cold

or dead shoe, etc.

For hanging from a

light stand, flash handle,

tripod knob, belt, etc.

Lanyard

Shoe Mount

susTaining high PerformanCe

Long distance performance from

your PocketWizards depends on the

orientation and position of the units.

Whenever possible, try to maintain a line

of sight between the units and keep the

antennas parallel. Make sure they are not

near any large metal, concrete, or high

water-content objects. People and trees

are mostly water! Make sure they are not

blocked by these objects or by hills.

Maintain at least 12" distance between antennas. Avoid direct antenna contact with

anything metallic. “Dead spots” have a number of causes, but the solution is usually

the same: move the unit a few inches or feet away from the problem area.

Positioning

PoorAcceptable

Best

Worst

Blocking Signal