Specifications

MiniTT1 Plus II, MultiMAX, Integrated, or FlexTT5
connected to manual ash
Remote ash with or without CLS / i-TTL ash on camera
1. Slide MiniTT1 Transmitter onto camera.
2. If desired, slide Nikon i-TTL Speedlight onto MiniTT1 radio. Speedlight must be in master
mode, as non-master operation disables remote triggers.
3. Make sure all your PocketWizard radios are on the same channel and take pictures normally.
Note: Manual remote ashes are not calculated as part of the i-TTL exposure.
Adjust your exposure or FEC to compensate accordingly.
Use PocketWizard Utility to engage HyperSync
™
and explore faster than X-sync shutter
speeds. Visit www.PocketWizard.com for more information.
Learn about the AC3 ZoneController, PowerTracking, and controlling your Speedlights and
select studio ashes by reading the extended documentation for the following PocketWizard
radios and accessories:
• AC3 ZoneController for Nikon
• PowerST4 for Elinchrom
• AC9 AlienBees Adapter for Nikon
Manual FlashManual Flash