Owner`s manual

Overview
ControlTL
tm
Firmware Version 5.0 is the most advanced rmware for the MiniTT1 Transmitter and FlexTT5
Transceiver. This newest ControlTL rmware incorporates several new features, many performance
improvements and some new camera and ash compatibility. This rmware has been tested via the
PocketWizard Beta Lab.
Current MiniTT1 Transmitter and FlexTT5 Transciever owners can upgrade to the new rmware for free via
the PocketWizard Utility. Current users will need to upgrade their PocketWizard Utility to version 1.18.9,
which is also on the downloads page. Please see a list of changes to the new Utility at the end of this
document.
When upgrading your radios, be sure to upgrade all MiniTT1’s and FlexTT5’s to v5.0. Radios will only
operate as expected when all units are using the latest rmware.
Compatibility
Added Canon 7D compatibility. Like the 5D Mark II and other cameras, adjusting Speedlites via the
in-camera menu is not supported.
Added Metz 58 AF-1 Canon (rmware v3.0) and Metz 48 AF-1 Canon (rmware v2.0) compatibility. These
ashes now work with the ControlTL system.
Key New Features
Automatic Camera Detection:
Camera model detection is now truly automatic. This feature obsoletes the need to select your camera
model via the PocketWizard Utility. This gives you optimized High Speed Sync straight out of the box. On the
Misc Tab, leave your camera model set to Auto (default) to use this feature. If you select your camera model,
you will get the exact same features as with Auto, but you will not be able to switch your MiniTT1 or FlexTT5
radio to another camera model without rst selecting it in the Utility. Always turn OFF your radio when
switching cameras even if they are the same model.
December 29, 2009
[e-mail]
Owner’s Manual: Addendum 5.0
MiniTT1 Firmware Upgrade to version 5.000
FlexTT5 Firmware Upgrade to version 5.000
PocketWizard Utility Upgrade to version 1.18.9
340.00 - 354.00 MHz, FCC/IC
433.42 - 434.42 MHz, CE
MiniTT1
TM
/ FlexTT5
TM
for Canon
www.PocketWizard.com