Owner`s manual
info@pocketwizard.com
2
Compatibility: 
  - Added MiniTT1 and FlexTT5 for Canon compatibility with the AC3 ZoneController for Canon. 
    - For more information on this new PocketWizard accessory, please go to: 
     www.PocketWizard.com/products/transmitter_receiver/ac3zonecontroller/ 
  - Added compatibility with the Canon Rebel T2i. 
    - See operational note below on specic issue at some HSS shutter speeds. 
  - Canon 7D compatibility expanded.
    - See operational note below on specic issue with 17-55 EF-S lens. 
  - 1D Mark IV compatibility expanded. 
    - See operational note below on specic issue at some HSS shutter speeds. 
Bug Fixes / Renements:
  - Older Speedlites like the 550EX and 420EX will now trigger from a transmitter’s TEST button.
  - The FlexTT5 now triggers remote cameras set to 1/400th or faster. 
  - Rear Curtain Sync clipping has been vastly reduced for many cameras and RCS shutter speeds.
  - Pre-Flash Boost Mode no longer under exposes for the on-camera ash when Force TTL 
   Master Mode is enabled (as it is by default).
  - Radio signal timing has been further optimized for reliability. 
  - Improved error correction around pre-ash data. 
  - Several other minor bugs related to camera communication have also been corrected.
Utility Renements: 
- In the Utility, “Rx” was changed to “Receive” and “Tx” was changed to “Transmit” for more clarity 
   when selecting channels. 
  - Removed G9 and G10 from camera selection in the Utility. These cameras, as well as the G11, are 
   supported in Basic Trigger Mode only. 
  - New control on Exposure tab allows remote ashes to ignore any changes from the camera. This 
   allows another camera to be in control of the ash. 
www.PocketWizard.com










