Owner`s manual
Congratulations on your purchase of the PocketWizard MiniTT1
™
/ FlexTT5
™
 System for 
Canon DSLR E-TTL II cameras and flashes. Canon owners can use the MiniTT1 Transmitter and 
FlexTT5 Transceiver to control single or multiple off-camera Canon E-TTL II ashes at speeds up to 
8fps. The PocketWizard ControlTL™ System takes the complex E-TTL II data being sent through 
the camera’s hot shoe and digitally interprets and transmits it as a reliable radio signal. You can now 
place E-TTL II (or manual) ash units anywhere to illuminate the scene: Around corners, out-of-sight 
and in bright sunlight. The MiniTT1 and FlexTT5 are compatible with any PocketWizard for triggering 
manual ash or remote cameras.
This US FCC/Canada IC frequency PocketWizard radio slave is compatible with all US frequency 
PocketWizard products. It is not frequency compatible with CE or JAPAN PocketWizard products. Verify 
frequency compatibility before purchasing. The MiniTT1 and FlexTT5 are protected by various patents 
and other patents pending.
Congratulations
3










