Owner`s manual

Continuous Remote Camera Triggering (FlexTT5 only)
This feature allows for triggering a continuous motor drive burst of a camera connected to P1 on a remote FlexTT5. You can
use most PocketWizard transmitters (Sekonic meters excluded) – just press and hold TEST on the transmitting unit to have the
remote camera, set for continuous shooting, trigger for as long as you hold TEST.
SPECIAL NOTES
• The FlexTT5 must have at least one of the following conditions met for this feature to function properly:
- Mount the FlexTT5 off the shoe of the remote camera.
- Have Bottom Shoe Disable mode selected.
- Use Basic Trigger Mode.
• ItisnotpossibletocombinecontinuousremotemotordriveoperationwithETTLoperationontheremotecamera.
• IfAuto-RelayModeforE-TTLIIoperationisrequired,thenitwillonlyfunctioninsingleshotmode.
3
[e-mail]