Specifications

PocketWizard Utility
You will need the PocketWizard Utility and your ControlTL transmitter
connected to a computer via the Mini-USB port in order to change the
following setting. Download the Utility at www.PocketWizard.com/support
Flash Tab
Speedlight Control: Adjusts how Nikon Speedlights will respond to the AC3, or ControlTL transmitter like the
MiniTT1 or FlexTT5 with no AC3.
Normal CLS / i-TTL: The Power Dials of the AC3 on a MiniTT1 or FlexTT5 will adjust Flash Exposure
Compensation normally. This is the default and recommended setting.
No Change (trigger only): The Power Dials of the AC3 on a MiniTT1 or FlexTT5 will not adjust power
output. Use this setting if another AC3 is controlling the Speedlight’s manual power output, like when
sharing Speedlights with another photographer and you want to use the exact same manual ash output
power. CLS / i-TTL will not function with this setting as it is intended for manual ash power output control only.
For other PocketWizard Utility settings, refer to the extended documentation for the MiniTT1, FlexTT5,
PowerST4 for Elinchrom, AC9 AlienBees Adapter, or other ControlTL radios or accessories.