Specifications

Nikon-style Hot Shoe
(for connecting to a MiniTT1
®
or FlexTT5
®
for Nikon only)
Status LED
Power Dials
All equipment should be turned OFF when
making connections or unwanted triggering
or other erratic behavior may occur.
The rst exposure after making initial connections
or powering on may not be properly exposed and
ash power levels may not be set as expected.
The rst exposure is a calibration shot. Always test
at least twice.
Make sure all PocketWizard radios are set
to the same PocketWizard channel.
No batteries required.
The AC3 ZoneController is powered via the hot
shoe connection of a MiniTT1 or FlexTT5 radio.
When used with a MiniTT1, the AC3 sleeps when
the MiniTT1 sleeps.
READ ME FIRST:
Release Button
ZoneController
Mode Switches