User guide

Getting Started 20
3. To set up connection with a hidden network, open
Connection to a hidden network and enter its SSID from
the on-screen keyboard in the Network name (SSID) eld.
4. Select the security type in the corresponding list:
• None – for an open network
• Simple (WEP) – after you select this option, you
will need to specify WEP Authentication type – Open
System or Shared Key. The Device cannot recognize
the type of authentication automatically
• WPA/WPA2 Enterprise – you will need to specify
username, password and domain (if necessary)
• WPA/WPA2 PSK – you will need to enter a
network key (up to 64 symbols)
5. Open Advanced settings. Select the idle time
before disconnection in the corresponding section
6. If it is needed to congure network settings
manually, go to Advanced settings, and change IP address
conguration: