User Manual
Getting Started 20
connection name as you’d like it to be displayed on the
Device
NOTE Connection name eld species only the display name of
the connection. For correct communication Network name (SSID)
must be the same as network transmits
4. Select security type in the corresponding list:
• None – for open network
• Simple (WEP) – after you select this option, you
will need to specify WEP Authentication type – Open
System or Shared Key either. The Device cannot rec-
ognize authentication type automatically
• WPA/WPA2 Enterprise – you will need to specify
user name, password and domain (if necessary)
• WPA/WPA2 PSK – you will need to enter net-
work key (up to 64 symbols)
5. Select the idle time before disconnection in the
corresponding section