Operation Manual

Getting Started 21
• WPA/WPA2 PSK – you will need to enter
network key (up to 64 symbols)
5. Select the idle time before disconnection in
the corresponding section
6. By default Network settings set to DHCP
(dened by network). If it’s needed to congure
network settings manually, go Network settings,
change IP address conguration to Manual and enter
network conguration from on-screen keyboard
7. If the network you need to connect to has a
proxy server, you can specify its pararmeters in Proxy
conguration section
8. To check network conguration select Test
connection and press OK.
You can select one of pre-congured connections
to be used by default. To proceed, select Preffered
connection and select one from the list.