Operation Manual

Getting Started 20
will turn to the same as Network name (SSID). If
you’d like to change connection (for example, Home
or Ofce) press OK and enter connection name as
you’d like it to be displayed on the Device
NOTE Connection name eld species only the display
name of the connection. For correct communication
Network name (SSID) must be the same as network
transmits
4. Select security type in the corresponding list:
• None – for open network
• Simple (WEP) – after you select this option,
you will need to specify WEP Authentication
type – Open System or Shared Key either. The
Device cannot recognize authentication type
automatically
• WPA/WPA2 Enterprise – you will need to
specify username, password and domain (if
necessary)