Operation Manual

Getting Started 14
• When the battery is fully charged, indicator
turns solid. Now you can disconnect the Device and
turn it on for the rst use.
If the Device is on when you connect the cable to
PC, a dialog window asking to select action – PC
link or Charge – will appear. Charge will start if
corresponding mode selected only.
POWER MANAGEMENT
To turn on the Device, press and hold On/Off button
for a few seconds until startup logo will appear.
When the Device is ready to operate, an image will
be changed to Main menu or last opened book,
depending on settings (Settings > At startup, open).
To turn off the Device, press On/Off button
continuously until the Device goes off. If you will
press power button shortly, the keypad of the Device