User manual

Getting Started 13
If the Device is on when you connect the cable to PC, a dia-
logue window asking to select action – PC link or Charge–
will appear. Charging will start if corresponding mode is
selected only.
POWER MANAGEMENT
To turn on the Device, press On/Off button. When the De-
vice is ready to operate, Main menu or last opened book will
appear, depending on settings (Settings> Personalize > At
startup open).
To turn off the Device, press and hold On/Off button for
about two seconds until the Device goes off. If you will
press power button shortly, the keypad of the Device will
be locked and the lock screen will appear. To unlock the
keypad, press On/Off button again.
In addition, you can set automatic key lock or power off:
go to Settings > Saving Power > Lock device after or Power