Shutter Driver

MODEL NUMBER
OUTPUT SWING
0 to -3.5kV
INPUT VOLTAGE
+15V 0.5V
825B-1
825B-2
TRIGGER
TTL
OPTO-ISOLATED
Typical Part Number: 825B-2-HV = Input Voltage: +15V 0.5V
Output Voltage: 0 to -3.5kV
Trigger: Opto-isolated, active high current of 2.5mA
Voltage Control: Internal multi-turn trimpot
HV Monitor: HV monitor lead provided to set HV prior to pulsing
* Rotate HV Adjust trimpot counter-clockwise to increase output voltage
CAUTION: Mounting hardware must be Non-Conductive. Nylon hardware is provided.