Use and Care Manual

Foranymissinghardware,damagedpartsandotherproblems.

WELCOMEtoemail usat:service@behousewell.com

callat1‐888‐733‐8169Tollfree

Between9AMand5PMEasterntime,MondaythroughFriday

*Don't fully tighten all the bolts till the very end!

PRE‐ASSEMBLYPREPARATION:

‐‐‐ Pleasereadthroughtheinstructionsbeforebeginningassembly.

‐‐‐ Clearoutthespaceforassemblyandlayoutallofthepartsbasedon

thePartsList,extraroomwillallowyoutoeasilydetermineifallthepieces

arepresent.

‐‐‐ Keepsmallpartsandpiecesaw ayfromchildrenuntilfullyassembled.

AssemblyInstructions

2023.11.29

PAGE 1
Assembly Instructions For any missing hardware, damaged parts and other problems. WELCOME to email us at: service@behousewell.com Or call at 1‐888‐733‐8169 Toll free Between 9AM and 5PM Eastern time, Monday through Friday *Don't fully tighten all the bolts till the very end! PRE‐ASSEMBLY PREPARATION: ‐‐‐ Please read through the instructions before beginning assembly.
PAGE 2
Part no. Part QTY A1 Left arm A2 Right arm Image Part no. Part QTY 1 F Seat cushion 1 1 G Bolt 4 Image (M6*15mm) B Back 1 H Bolt 6 (M6*35mm) C Seat 1 I Washer 10 D Runner 2 J Self‐tapping Screw 4 (M5*35mm) E Back cushion 1 K 1 Allen Wrench Step 1: Attach arms A1&A2 to back B with 4pcs bolts G and 4pcs washers I, using Allen wrench K. Note: Don’t fully tighten the bolts.
PAGE 3
Step 2: Attach seat C to arms A1&A2 with 4pcs bolts H and 4pcs washers I, using Allen wrench K. Note: Don’t fully tighten the bolts. A2 A1 C I H H 4 M6*35 4 I Step 3: Attach seat C to back B with 2pcs bolts H and 2pcs washers I, using Allen wrench K. Note: Please fully tighten all the bolts.
PAGE 4
Step 4: Attach 2pcs runner D to arms A1 & A2 with 4pcs self‐tapping screws J. D J J D Front 105mm J M5*35 4 Step 5: Put seat cushion F and back cushion E onto the seat. Assembly is now complete and the product is ready for use.