Instructions / Assembly

Step 5: Turn over the assembled chair bucket and secure the swing arms on U-shaped

fitting (D) to the bottom tube of left arm (A1) and right arm (A2) with 4 bolts (J), and 4

nuts (H) with allen wrench (K) and wrench (L).

NOTE: PLEASE FIX TWO boltS IN DIAGONAL POSITION TO KEEP THE BALANCE

THEN FIX THE OTHER TWO boltS.

Push the top plate on the base (E) with diffrent position to make the holes open for

ready assembling. Connect the 4 bolts (J) through the holes of the plate on the base

(E) and the holes on the tube of U-shaped fitting (D) with 8 washers (G) , 4 spring

washers (F) and 4 Nuts (H) by using allen wrench (K) and open end wrench (L) .

NOTE: THIS STEP IS VERY IMPORTANT. DO READ THE INSTRUCTION AND

DIAGRAM CAREFULLY.