Use and Care Manual

STEP-BY-STEP ASSEMBLY:
Step 1: Attach the 4 legs (B) to table top (A) by 8 bolts (D) and 8 washers (F) with hex
key (G). Do not fully tighten bolts now.
Step 2: Attach table tray (C) to 4 table legs (B) by 4 bolts (E) and 4 washers (F) with
hex key (G). Turn over the assembled table, verify the alignment and adjust, then fully
tighten all the bolts.
1
2
3/3
1/3