Owner's Manual

Warning! To avoid the risk of personal injury or property damage from fire or electrical shock, only use accessories
specifically designated for this product.
Basic Operations
In order to get the most out of your new radio, read this reference guide completely before attempting to operate the unit.
1. Turning the Radio On and Adjusting the Volume
(1) Press and hold [
/CALL] to turn the radio on.
(2) To change the volume level, press  or  to increase or decrease the volume level.
(3) Press and hold [
/CALL] to turn the radio off.
2. Choosing a Channel
Your radio has 22 channels and 155 Privacy codes you can use to talk to others. In order to speak to someone, both your
radios must be set to the same channel and Privacy code.
Press the [MENU] button once, and then the  or  buttons to select one of the 22 FRS channels. To confirm the selection,
press the [PTT] button or press the [MENU] button again to move to the next feature setting.
Note: You can check the FRS channel transmission activity status through the icon. On 1-7 and 15-22 channels, it is
high-power transmission and icon is displayed. On 8-14 channels, it is low-power transmission and icon is
displayed.
3. Talking on Your Radio
To talk to others using the radio:
(1) Press and hold the [PTT] button and speak in a clear, normal voice about 2-3 inches away from the microphone. While
you are transmitting, the TX icon appears on the display. To avoid cutting off the first part of your transmission, pause
slightly after pressing the [PTT] button before you start talking.
(2) When you have finished speaking, release the [PTT] button. You can now receive incoming calls. While receiving, RX