Owner's Manual

7. Dual Watch Function
Your radio has a DUAL WATCH function, to enable user to scan 2 channels for any activity. The first channel will be the
current channel setting and the second channel will be the selected channel on the [MENU]. To turn the DUAL WATCH on,
press the [MENU] button until the “oF” icon appears blinking on the left of the display, while the “dU” icon appears on the
left. Select the second channel by pressing the  or  button. Press the [MENU] button again and the  or  buttons to
choose the Privacy Code (oF/dc/ct). Then press the [MENU] button again and the  or  buttons to set the Privacy Code.
Pls. note that the Privacy Code can be set only on Ch 1~22. To confirm, press the [PTT] button or the [MENU] button. The
DW icon appears, the current channel and the watch channel flash alternately, indicating that the DUAL WATCH function is
turned on, and the radio will start scanning the currently used channel/code and watch channel/code, and stop on any active
channel. Your radio will resume scanning after 4 seconds when the channel is no longer active. When you press the [PTT]
button to transmit on an active channel, the scanning function will stop and remain on the active channel for 10 seconds
before resuming scan when the [PTT] button is no longer pressed. To turn the DUAL WATCH function off, press the [SCAN]
button.
Appendix A. – Technical Specifications
Channels
Sub-Codes
Frequency Range
Operation Voltage
RF Output Power
FM Modulation
Adjacent Channel Power
Transmission current
22 FRS/12 Weather
50 CTCSS Tones/ 105 DCS Codes
FRS
DC 3.7 V ±10%
31dBm (FRS)
11K0F3E@12.5KHz
60dB @ 12.5KHz
≤1000mA
NOTE: All specifications may be modified without prior notice or liability.