Owner's Manual
code system and number you select.
To select a Privacy Code for the current channel press the [MENU] button twice, and then the or buttons to select
between “OF/CT/DC.” Press the [MENU] button again and or buttons to select one of the 50 CTCSS Codes or one of the
105 DCS Codes. The Privacy Code icon on the display will indicate whether you set your Privacy Code in CTCSS or DCS mode.
To confirm the selection, press the [PTT] button or press the [MENU] button again to move to the next feature setting.
NOTE: If you select a CTCSS Privacy Code, any pre-selected DCS Privacy Code will be cancelled and vice-versa. Selecting a
Privacy Code of "oF" will disable the Privacy feature. To communicate between two radios, all radios in your group must be
set to the same channel and/or Privacy Code selections. The Privacy Code can only be set in channels 1~22.
2. VOX (Hands-Free Transmission)
Your radio has 3 VOX level settings: (oF/1/2/3).
To set VOX, press the [MENU] button until the display shows “VOX” blinking while on the right of the CHANNELNUMBER
display, an “oF” icon appears. Select “1”,“2” or “3” by pressing the or buttons and push the [PTT] key, or press the
[MENU] button again to move to the next feature setting.
VOX will be more sensitive on the “1” setting than on the “3” setting. To turn VOX off, press the [MENU] button until the
display shows “VOX” blinking while on the right of the CHANNELNUMBER display, a “1”,“2” or “3” icon appears. Select “oF”
by pressing the or buttons and push the [PTT] key, or press the [MENU] button again to move to the next feature
setting.
3. Ten Call Tone Settings
Your radio has 10 selectable CALLALERTS.
To select, press the [MENU] button until a “CA” icon appears and to the right of the “CA” icon the current CALLALERT setting
is displayed. Then press the or buttons to make the CALLALERT selections - the radio will emit a corresponding tone for
each selection. To confirm, press the [PTT] button or press the [MENU] button to move to the next feature setting.