Users Manual
Care and Maintenance
57 / 77
The device does
not
have to be opened to replace the fuse.
Fig.9–1Opening the fuse holder
A
B
C
1. Switch device off.
2. Disconnect device from power supply by pulling the mains plug from the
mains socket.
3. Remove power connection cable from mains socket.
4. The fuse holder is located next to the mains socket.
5. Remove fuse holder as depicted in Fig. Opening the fuse holder [}57].
6.
A
Undo the latch of the fuse holder with two fingers.
7.
B
Remove the fuse holder.
8.
C
Check fuse.
9. Insert a new fuse. Use only the specified type of fuse (see Chapter Technical
Data [}67]).
10. Insert the fuse holder until it can be heard snapping into place.
en
DRAFT