User Guide

IMPORTANT SAFETY INSTRUCTIONS

Read and keep these instructions.

Heed all warnings and follow all instructions.

Do not use this apparatus near water.

Clean only with a dry non-abrasive cloth. Do not use solvents, abrasives,

waxes or liquids as they may be detrimental to the cabinet nish.

Do not inhibit airow around the unit. A free ow of air behind the

loudspeaker is necessary to maintain sufcient cooling. A minimum of

80mm (3-inches) is required.

Installing these speakers into softs may cause overheating and will

invalidate the product warranty.

Do not install near heat sources eg: direct sunlight, radiators or other

apparatus that produce heat.

This unit must be Earthed. Do not use the loudspeaker with an unearthed

mains cable or an unearthed mains connection as this may compromise

electrical safety. A suitable mains cable is supplied with the product.

• Apparatets stikprop skal tilsluttes en stikkontakt med jord, som

giver forbindelse til stikproppens jord.

• Laite on liitettävä soujakoskettimilla varustettuun pistorasiaan

• Apparatet må tilkoples jordet stikkontakt

• Apparaten skall anslutas till jordat uttag

The amplier is not disconnected from the mains supply unless the power

cord is removed from the unit or the mains outlet.

Protect the power cord from being walked on or pinched, particularly at

inlets and outlets.

Unplug this unit during lightning storms or when unused for long periods.

There are no user-serviceable parts inside. Refer all servicing to qualied

personnel.

Servicing is required when the unit has been damaged in any way, produces

abnormal odours, has been exposed to liquids, rain or moisture, does not

operate normally, or has been dropped.

Only use with accessories and brackets specied by PMC, and ensure all

stands and ttings are safe and secure. Ensure the loudspeakers do not tip/

fall and cause injury or damage.

These monitors can produce high sound pressure levels (SPLs). Exposure to

high SPLs has the potential to cause hearing damage. Adjust the system’s

sound pressure level to remain within safe limits.