User Guide

For example, 6-2-RIGHT-2021-8-27_14-30.json would indicate a preset le
from the right-hand PMC6-2 saved on 14:30 on the 27th August 2021.
• Multi-channel presets: N-CHANNEL1-CHANNEL2…CHANNELN-DATE_TIME
N is the number of channels in the preset, so, 3-LEFT-CENTRE-
RIGHT-2021-8-27_14-30.json would indicate a preset le with an entry for left,
centre and right speakers (3 total) saved at 14:30 on the 27th August 2021
Previously saved preset les stored on your device can be uploaded to the
speakers by selecting the ‘Load from File’ button. If a single-channel preset
le is uploaded it will be applied to all selected speakers.
If a mutli-channel preset le is uploaded the settings for each channel in the
preset will be applied to any speakers in the selected group with the same
channel assignment. For example, if the preset le contains settings for a
5.1 system, the settings for the ‘Left’ speaker entry in the preset le will be
applied to all selected speakers that have their Channel set to ‘Left’, and
the settings for the ‘Centre’ speaker entry in the preset le will be applied
to all selected speakers that have their Channel set to ‘Centre’, and so on.
Firmware Updates
The rmware of PMC speakers that contain SoundAlign can be updated
through the web interface.
The Get Firmware button links to an area of the PMC website where rmware
les can be downloaded to your device (PC, Mac etc.) Firmware les have
a .pmc le extension.
The Update Firmware button allows you to upload a rmware le from your
device to all selected speakers. Once a rmware le is selected in the pop-
up window on your device, the rmware update process will begin.