User Guide
Accessing SoundAlign
The SoundAlign web interface is hosted in each speaker and therefore
an internet connection is not required. As SoundAlign is browser-based it
is compatible with all devices (PC, Mac, Android, iOS), and no software
installation is required.
To access the SoundAlign interface rst connect each speaker either to
an existing LAN or a new dedicated network. Special network hardware
is not required and the control data happily co-exists with other network
trafc, although we recommend a minimum network speed of 100Mbit/s.
Alternatively, to congure an individual speaker via the web interface,
connect an Ethernet cable directly from the speaker to a PC or Mac.
Once a speaker is connected to a network, its IP address will be displayed
on the rear-panel LCD. The SoundAlign interface can then be accessed
from any device on the same network by navigating to:
http://soundalign.local/
Some network hardware will not support the http://soundalign.local/
address and in this case the web interface can be accessed by navigating
to the specic IP address displayed on the speaker’s rear-panel LCD.
Most of the features and controls in the SoundAlign interface mirror the user
controls described in the previous section, but there are some additional
features that can only be accessed from the SoundAlign web interface.
The illuminated PMC logo on the front of each loudspeaker will briey blink
whenever an interaction is received from the SoundAlign web interface.