User Guide

CONTROLS AND CONNECTIONS

LCD Display

The top row of the LCD indicates the PARAMETER, whilst the bottom row

displays the VALUE of that parameter.

Rotary Encoders

Used to modify the speaker’s settings.

Rotate the top encoder to change to a different PARAMETER.

Rotate the bottom encoder to modify the VALUE of said parameter.

Press & hold the top encoder to show the rmware version.

Press the bottom encoder to switch between coarse & ne parameter

mode. Coarse mode is indicated by a ‘*’ symbol at the bottom right of the

LCD and is used to make larger changes to the parameter VALUE. This is

useful, for example, when sweeping the frequency of a PEQ between 20

and 20,000 Hz.

Digital Through Output

AES3 digital XLR3m provides a ‘through’ output for daisy-chaining this

speakers’ audio input to another speaker. The sample rate of this output is

xed at 96kHz, 24 bits.