Brochure

PMC6-2
A serious near/mideld monitoring tool that ts easily within any control room
or immersive system, the PMC6-2 is unmatched in its outstanding clarity,
forensic resolution, and sheer impact. It provides main-monitor scale, depth,
and dynamics, and allows mix decisions to be made quickly, with absolute
certainty and without fatigue.
This 3-way active monitor speaker combines two custom 6-inch ultra-long-
throw bass-drivers with our radically engineered PMC55 2-inch soft-dome
mid-range unit and a precision-built one-inch soft-dome tweeter. The
PMC55’s distinctive ‘N-compass’ waveguide enhances the wide dispersion
and remarkable mid-range projection of the driver; in combination with
the high performance of the tweeter, the result is an ultra-wide and stable
image, with a smooth and natural in-room response. Each bass driver
is individually powered by a cutting-edge 400W Class-D amplier, and
seamlessly integrated by our sophisticated, highly accurate DSP-based
crossovers. As with the PMC6, the monitor is congured using rear-panel
controls or the browser-based SoundAlign software, with comprehensive
boundary and EQ options.
The PMC6-2 offers astonishing size-to-performance ratio thanks to its
ATL
™
bass-loading technology, which results in exceptional LF extension
and consistent tonal balance at all listening levels. Our Laminair
™
airow
technology, visible in the monitor’s hexagonal vent ducts, further reduces
colouration and enhances dynamics and efciency.
A simple upgrade path converts the PMC6-2 to a full-range XBD system; just
add a PMC8.2 SUB and select XBD mode to perfectly dovetail the two units,
extending the response down to 25Hz with additional headroom.
• Active 3-way neareld reference monitor with ATL
™
bass loading
• Frequency response: 33Hz - 25kHz (- 3dB @1m full space, on-axis)
• Max. cont. SPL: 109dB @1m (Half space value calculated as +3dB from full space
measurement. Unweighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours
AES2-1984 duration)
• State-of-the-art Class-D ampliers: HF 400W, MF 400W, LF 2x 400W
• Analogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate)
• Digital ‘through’ output (AES3 24-bit 96kHz)
• SoundAlign network control interface for single or group EQ & settings
• Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
• PMC6-2 + PMC8-2 SUB = PMC6-2 XBD, with LF down to 25Hz & increased headroom
• Ceiling-mount yoke allows suspension in multi-channel or immersive systems
PMC6-2
(left)
PMC6-2
(right)
YOKE 18
(ceiling mount)