Brochure

PMC6
If you are a professional who needs the last word in reliable reference
monitoring in a compact form, then the PMC6 active two-way is the
answer. Packed with innovation and providing the same sonic signature as
our renowned larger monitors, it’s ideal for smaller control rooms or for use in
larger immersive systems, where its astounding resolution allows critical mix
decisions to be made with absolute condence.
With 20mm of excursion, the bespoke 6-inch bass driver is designed
specically to integrate with our latest ATL
™
bass-loading and Laminair
™
airow technologies. The combination outperforms most 8-inch monitors,
offering unparalleled bass extension, headroom, dynamics, and low
distortion at all levels. The high end is courtesy of a one-inch precision-built
fabric soft-dome tweeter, with a shallow waveguide that creates wide,
tonally consistent dispersion and rock-solid imaging. Both the bass and
treble drivers are precisely and individually controlled by a pair of 200W
ultra-low-distortion, high-damping-factor Class-D ampliers.
Whether in portrait or landscape placement, the PMC6’s sophisticated
DSP engine automatically adjusts the crossover, ensuring optimum tonal
accuracy, phase and imaging.
The monitor can be calibrated using the rear-panel controls or with PMC’s
intuitive browser-accessible SoundAlign software.
The PMC6 can be upgraded by adding a PMC8 SUB to create a full-range,
free-standing PMC6 XBD system. Activating the ‘XBD’ DSP mode ensures
the perfect marriage of the two units, creating a clean LF extension down
to 25Hz.
• Active 2-way neareld reference monitor with ATL
™
bass loading
• Frequency response: 39Hz - 25kHz (- 3dB @1m full space, on-axis)
• Max. cont. SPL: 106dB @1m (Half space value calculated as +3dB from full space
measurement. Unweighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours
AES2-1984 duration)
• State-of-the-art Class-D ampliers: HF 200W, LF 200W
• Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
• Digital ‘through’ output (AES3 24-bit 96kHz)
• SoundAlign network control interface for single or group EQ & settings
• Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
• Automatic portrait/landscape placement DSP correction
• PMC6 + PMC8 SUB creates PMC6 XBD, with LF extension down to 25Hz
• Ceiling-mount yoke allows suspension in multi-channel or immersive systems
PMC6
(left vertical)
PMC6
(left horizontal)
PMC6
(right vertical)
PMC6
(right horizontal)
YOKE 18
(ceiling mount)