Brochure

The SoundAlign web interface is a highly intuitive and responsive means of
controlling and conguring our neareld and mid-eld active DSP monitors
(and the two associated subwoofers). Each monitor speaker incorporates an
internal web-server accessible over a standard wired Ethernet connection
using any typical web-browser on any smart-phone, tablet, PC, or Mac
computer.
Loudspeakers can be controlled individually or in dened groups of multiple
speakers (up to 16), and every DSP menu function and parameter can
be viewed and adjusted, with conguration settings stored and recalled
instantly as presets or copied between speakers. Facilities are provided to
congure the input format and level, boundary mode correction, delay,
and polarity options, as well as an EQ section with interactive graphical
display offering ve parametric bands plus high and low shelf sections.
The SoundAlign interface also makes it very simple to upload new rmware
to all selected speakers, when necessary, and a group lter mode allows
dened subsets of speakers to be displayed and controlled entirely
separately from other groups – a brilliant asset in complex multi-room
installations or with multichannel speaker arrays.
A dedicated network is not necessary – the loudspeakers can be connected
to any standard LAN as the SoundAlign data happily co-exists with other
network trafc (Internet access is not required, either). Alternatively,
individual speakers can be congured by connecting a standard Ethernet
cable directly back to the Ethernet port on a PC or Mac, or by using the
controls on the rear panel.