Brochure

PMC8-2 SUB
The PMC8-2 SUB is a larger subwoofer for full-bandwidth, high-resolution
reference monitoring in the most demanding professional environments. A
true low-frequency monitor like the PMC8 SUB, and offering the same DSP
engine and seamless integration with surround and immersive systems, the
PMC8-2 SUB betters the spec of its smaller sibling, offering higher maximum
SPL output all the way down to 25Hz.
With the same dimensions as the PMC8-2 mideld monitor, the PMC8-2 SUB’s
twin eight-inch bass drivers are powered by independent 400W Class-D
ampliers. The same conguration options are available as on the PMC8
SUB, accessible on the speaker’s rear panel or by using the browser-based
SoundAlign software via a LAN-connected tablet, smartphone or computer.
The PMC8-2 SUB can be used as a standalone subwoofer for multichannel
and immersive sound systems, or as an XBD cabinet with either PMC6-2
or PMC8-2 monitors, creating a system of awesome power and dynamic
range. The sub is available in either left- or right-handed cabinet versions
(PMC8-2 SUB-L or PMC8-2 SUB-R), to allow placement of the bass drivers on
the outside edges of a stereo array, matching the arrangement of the main
monitors.
• Active subwoofer with twin 8-inch bass drivers and ATL
™
bass loading
• Frequency response: 25Hz - 500Hz (- 3dB) (@1m full space, on-axis)
• Max. cont. SPL: 115dB @1m (Quarter space value calculated as +3dB from half space
measurement. Unweighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours
AES2-1984 duration)
• State-of-the-art Class-D amplier: LF 2 x 400W
• Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
• Digital ‘through’ output (AES3 24-bit, 96kHz)
• SoundAlign network control interface for single or group EQ & settings
• Sophisticated DSP driver protection, EQ, and delay/phase options
• Dedicated XBD conguration mode
PMC8-2 SUB
(left)
PMC8-2 SUB
(right)