Datasheet

A serious near/mideld monitoring tool that ts
easily within any control room or immersive system,
the PMC6-2 is unmatched in its outstanding clarity,
forensic resolution, and sheer impact. It provides
main-monitor scale, depth, and dynamics, and
allows mix decisions to be made quickly, with
absolute certainty and without fatigue.
This 3-way active monitor speaker combines two
custom 6-inch ultra-long-throw bass-drivers with
our radically engineered PMC55 2-inch soft-dome
mid-range unit and a precision-built one-inch soft-
dome tweeter. The PMC55’s distinctive ‘N-compass’
waveguide enhances the wide dispersion and
remarkable mid-range projection of the driver; in
combination with the high performance of the
tweeter, the result is an ultra-wide and stable image,
with a smooth and natural in-room response. Each
bass driver is individually powered by a cutting-edge
400W Class-D amplier, and seamlessly integrated
by our sophisticated, highly accurate DSP-based
crossovers. As with the PMC6, the monitor is
congured using rear-panel controls or the browser-
based SoundAlign software, with comprehensive
boundary and EQ options.
The PMC6-2 offers astonishing size-to-performance
ratio thanks to its ATL
™
bass-loading technology,
which results in exceptional LF extension and
consistent tonal balance at all listening levels. Our
Laminair
™
airow technology, visible in the monitor’s
hexagonal vent ducts, further reduces colouration
and enhances dynamics and efciency.
A simple upgrade path converts the PMC6-2 to a
full-range XBD system; just add a PMC8.2 SUB and
select XBD mode to perfectly dovetail the two units,
extending the response down to 25Hz with additional
headroom.
OPTIONS & UPGRADES
PMC6-2
(left)
PMC6-2
(right)
PMC6-2 XBD
PMC8-2 SUB
YOKE 18