Installation Guide

frieze, rake and band boards
accessories installation
Lineals
Choose either a 3.5˝ or 5˝ lineal,
depending on the look you want to
achieve.
At Eave or Gable, butt the small leg
of the starter against, but not under
the J-Channel that was installed to
receive the soffit.
Nail the starter in place every 8˝ to
12˝ with nails centered in nailing
slots. (Fig.1)
Push the locking leg of the lineal into
the starter channel.
Nail the Lineal in place every 8˝ to
12˝ with nails centered in nailing
slots.
Install utility trim into the lineal
receiving channel, making sure to
align nail slots with lineal nail slots.
Install last course of siding. (Fig. 2)
In some situations you may have to
shim the utility trim or you can use a
Double utility trim.
8" - 12"
8" - 12"
Fig.1
Fig. 2
35